Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Recommended Filament Settings
(clarify Cura 3 setting title) |
|||
Line 77: | Line 77: | ||
** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value) | ** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value) | ||
The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a smaller retraction works far far better than using just retractions. | The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a smaller retraction works far far better than using just retractions. | ||
<br /> | |||
NOTES: | NOTES: |