Ultimaker 2: Difference between revisions

Jump to navigation Jump to search

Ultimaker 2 (view source)

Revision as of 22:58, 5 December 2017

50 bytes removed ,  5 December 2017
→‎Status
Line 6: Line 6:
==Status==
==Status==
<onlyinclude>
<onlyinclude>
Black PLA/PHA Filament to print parts for "Mother of all Cable Racks" Project.
Pastel Yellow PLA from filaments.ca
*'''Last known good settings''': (28-Sept-2017, PLA/PHA)  '''220&deg;''', 110% flow, print @ '''30mm/s''' (1/2 speed), travel @ '''60mm/s''' (also 1/2 speed), 0.4 mm nozzle size, 2.85mm filament size.
*'''Last known good settings''': (05-Dec-2017, Pastel Yellow PLA)  '''220&deg;''', 138% flow, print @ '''50mm/s''' (1/2 speed), travel @ '''150mm/s''', 0.4 mm nozzle size, 2.85mm filament size.
* Operational ... it can be '''Problematic'''
* Operational ... it can be '''Problematic'''
** Using a Brim to hold parts to the Print Bed is strongly recommended.
** Using a Brim to hold parts to the Print Bed is strongly recommended.
Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/1425"

Navigation menu