Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update for additional work done.
(→Machine Log: STILL X-AXIS SHIFTS) |
(→Status: update for additional work done.) |
||
Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
''' | '''Might finally be fixed/working''' ... many "short" (1 to 3 hr.) prints are needed, to prove that layer shifts have finally been fixed. | ||
'''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) So if needed, turn the Z-axis rod '''clockwise''' to bring the print head slightly closer to the build platform. Also, the X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. | '''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) So if needed, turn the Z-axis rod '''clockwise''' to bring the print head slightly closer to the build platform. Also, the X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. |