Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
m
→Machine Log: formatting edit
(→Known Issues and Fixes: edit "Filament Loading Problem") |
m (→Machine Log: formatting edit) |
||
| Line 56: | Line 56: | ||
* HOWEVER, the other side has a different high/low spots pattern, that is out by '''less than 0.1mm'''. (More than 0.06mm, and less than 0.1mm) | * HOWEVER, the other side has a different high/low spots pattern, that is out by '''less than 0.1mm'''. (More than 0.06mm, and less than 0.1mm) | ||
* So able to get the Carbon Fiber Plate working to print on, by ONLY using the '''one good side'''. | * So able to get the Carbon Fiber Plate working to print on, by ONLY using the '''one good side'''. | ||
** See the Known Issues and Fixes section, about the loose wood under-structure that holds the build plate. | ** '''See the Known Issues and Fixes section, about the loose wood under-structure that holds the build plate.''' | ||
|Allen | |Allen | ||
|- | |- | ||