251
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 19:40, 24 April 2018
, 24 April 2018→SD Card
(Request for new Slicr config link) |
|||
| Line 33: | Line 33: | ||
== SD Card == | == SD Card == | ||
You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file (made in slic3r) to x3g using this utility http://markwal.github.io/GpxUi/ | You can print from the printer directly by putting your print file on an SD card, there is one already in the printer. It only accepts x3g files, so you will have to convert your .gcode file (made in slic3r) to x3g using this utility http://markwal.github.io/GpxUi/ | ||
A copy of GpxUi can be found on the SD card in the printer. | |||
==Slic3r Settings== | ==Slic3r Settings== | ||