Jump to: navigation, search

Laser Manual

81 bytes added, 17:10, 1 May 2018
/* Converting Files */ Added fusion360 postproc
=== TrueType Font Workflow ===
* The [ TrueType Tracer] is an open-source tool that takes a truetype font and some desired text, and spits out either g-code or a DXF. This has been used to generate a DXF that was then loaded into CAM Expert to generate g-code, the direct g-code output from the tool hasn't been tried yet.
=== Fusion360 Workflow ===
== Hardware Overview ==