3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search

3D Printers/FlashForge Creator Pro (view source)

Revision as of 23:21, 8 August 2018

139 bytes removed ,  8 August 2018
→‎Status
(→‎Cura 3 Settings for this Printer: start adding settings for the FlashForge)
Line 3: Line 3:
== Status ==
== Status ==
<onlyinclude>
<onlyinclude>
* '''Temporarly DOWN'''
* '''Working'''
** '''Out of filament''', due to "last roll of PLA" in the Dry Bin was NOT PLA. And '''Right Head is unable to unload filament'''.
* [[FlashForge_Creator_Pro#Usage|Slic3r Settings here]]
* [[FlashForge_Creator_Pro#Usage|Slic3r Settings here]]
* '''http://octopi4.hacklab.to/'''
* '''http://octopi4.hacklab.to/'''
Retrieved from "https://knowledge.hacklab.to/wiki/Special:MobileDiff/1564"

Navigation menu