Type A: Difference between revisions
Jump to navigation
Jump to search
→Recommended Filament Settings: at layer height note
m (→Recommended Filament Settings: better wording) |
(→Recommended Filament Settings: at layer height note) |
||
Line 64: | Line 64: | ||
'''Quality''' | '''Quality''' | ||
* Layer Height: 0.225 mm | * Layer Height: 0.225 mm (Using "Adaptive Layers", so this really means from 0.175mm to 0.275mm) | ||
* Initial Layer Height: 0.3 mm | * Initial Layer Height: 0.3 mm | ||
* Line Width: 0.35 mm ('''smaller''' than the 0.4mm nozzle) | * Line Width: 0.35 mm ('''smaller''' than the 0.4mm nozzle) |