Ultimaker 1: Difference between revisions

Jump to navigation Jump to search
no edit summary
(→‎Known Issues and Fixes: Add Retraction Settings from our Cura 15.04 settings)
No edit summary
Tag: Mobile edit
Line 7: Line 7:
<onlyinclude>
<onlyinclude>
* Operational
* Operational
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* '''Last known good settings:''' 220°, 110% flow, print 60mm/s, travel 120mm/s, retraction 4.5mm @ 40mm/s, 0.4 mm nozzle size, 2.85mm filament size.
* Burnt Orange PLA (from Filaments.ca)
* Burnt Orange PLA (from Filaments.ca)
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)
* Works well using Blue painter’s tape '''without''' using the heated bed. (Same setup as Ultimaker 2)
283

edits

Navigation menu