251
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 04:07, 12 January 2019
, 12 January 2019→Status
(→Status) |
|||
| Line 17: | Line 17: | ||
!Other layers | !Other layers | ||
!Notes | !Notes | ||
|- | |||
| Nov, 2018 | |||
| Hatchbox forest green ABS | |||
| Nozzle: 240, Bed: 110 | |||
| Nozzle: 240, Bed: 110 | |||
| DO NOT use enclosed chamber, weird I know. Put a fan on it after the 1st layer. 1st layer may be wavy, you may have to slow down the 1st layer a lot (like 15-20 mm/s). | |||
|- | |||
| Nov, 2018 | |||
| AMZ3D Black, ABS | |||
| Nozzle: 235, Bed: 110 | |||
| Nozzle: 230, Bed: 110 | |||
| Use enclosed chamber. Settings still not tweaked precisely, may over-extrude. Try lowering the temp by 5 deg, or set extrusion to 0.95 | |||
|- | |- | ||