251
edits
3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 05:01, 12 January 2019
, 12 January 2019→A few printing tips from the previous page for this printer
| Line 169: | Line 169: | ||
See https://github.com/prusa3d/Slic3r-settings | See https://github.com/prusa3d/Slic3r-settings | ||
==A few printing tips | ==A few random printing tips== | ||
Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will be unlikely to fail after that. | Smaller prints will better adhere to the bed than larger prints. If the print hasn't failed in the first 10% of the print job, it will be unlikely to fail after that. | ||
| Line 176: | Line 176: | ||
Do not use honeycomb -- as at the speeds of the default settings, it will cause printer to resonate and skip. | Do not use honeycomb -- as at the speeds of the default settings, it will cause printer to resonate and skip. | ||
Leaning or drifting prints? Tighten all the belts, especially the Y-axis stepper motor belt. That stepper is prone to becoming loose because the Y-stepper motor puts out more power than the X. A link to a video is in the maintenance section. | |||
==Octoprint at octopi4.hacklab.to== | ==Octoprint at octopi4.hacklab.to== | ||