Changes

Jump to: navigation, search

FlashForge Creator Pro

7 bytes added, 28 January
/* Status */
| :: Last known good workflow (for Chalmers) ::
1. Install slicer config
 
2. Install slicer config bundle
 
3. set slicer to simple mode
 
4. increase print scale by 4.1353% (because something screws the scale up in this workflow)
 
5. slice model
 
6. load sliced model into GpxUi
 
7. translate to Replicator 2 RepRap
 
|-
| Nov, 2018
9
edits