81
edits
PCNC1100: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 7: | Line 7: | ||
*1.5HP, 100 to 5140 RPM (two speeds, belt adjust) | *1.5HP, 100 to 5140 RPM (two speeds, belt adjust) | ||
*Feed Rate: 110 IPM (X,Y) 90 IPM (Z) | *Feed Rate: 110 IPM (X,Y) 90 IPM (Z) | ||
*Fixture plate: Grid of 3/8 | *Fixture plate: Grid of M10 threaded holes (Warning! This is not the same size as our mill clamping kit! Do not force those studs into the Tormach plate! The mill kit uses 3/8-16 threads) | ||
**TODO create 3D model | **TODO create 3D model | ||
**TODO buy holder clamp set | **TODO buy holder clamp set | ||
'''Tool Setter''' | '''Tool Setter''' | ||
*TODO | * https://tormach.com/electronic-tool-setter-31875.html | ||
* TODO | |||
'''Work Probe''' | '''Work Probe''' | ||
*TODO | * https://tormach.com/active-probe-kit-31858.html | ||
* TODO | |||
'''4th Axis''' | '''4th Axis''' | ||
The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z"). | The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z"). | ||
*TODO | * https://tormach.com/8in-super-spacer-motorized-rotary-table-33264.html | ||
* https://tormach.com/adjustable-tailstock-tall-30197.html | |||
* TODO | |||
'''Preventative Maintenance''' | '''Preventative Maintenance''' | ||
| Line 25: | Line 30: | ||
'''CNC Controller''' | '''CNC Controller''' | ||
*Uses PathPilot | *Uses PathPilot (based on LinuxCNC) | ||
*TODO | *TODO | ||