PCNC1100: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
| Line 10: | Line 10: | ||
**TODO create 3D model | **TODO create 3D model | ||
**TODO buy holder clamp set | **TODO buy holder clamp set | ||
== Usage & Safety == | |||
The milling machine is both a precision machine and also powerful enough to seriously hurt you. It needs to be treated with the same respect you would give any precision tool. All members are welcome to use the machine after being shown how to use it properly. | |||
# Only trained members may use this machine. | |||
# Tie back long hair, remove long sleeved shirts and jewelry. | |||
# Eye protection must be worn when machine is running. | |||
# Check all tooling and machine for damage before using. | |||
# Sweep / vacuum up chips and leave the machine clean. | |||
# No unconventional / unsafe use. | |||
# Usage on non-metals requires your own tools. | |||
# No hammering on the machine table. It is high precision! | |||
# You break it, you buy it! | |||
You '''MUST''' be trained before using this machine. Please consult a member who knows what they are doing. You can help a guest with a job but guests are not permitted to use the machine themselves. | |||
Note that knowing how to use a milling machine is not sufficient - You must be shown by a trained member the intricacies of '''our machine.''' | |||
'''Tool Setter''' | '''Tool Setter''' | ||