251
edits
3D Printers/Ender 5 plus: Difference between revisions
Jump to navigation
Jump to search
→Usage
(→Usage) |
(→Usage) |
||
| Line 59: | Line 59: | ||
- there is no octoprint or other network connection set up yet. There is usb port on the side of the touchscreen and there should be a usb stick in it, use that | - there is no octoprint or other network connection set up yet. There is usb port on the side of the touchscreen and there should be a usb stick in it, use that | ||
- use this config file for prusaslicer | - use this config file for prusaslicer | ||
[[Media:Prusaslicer - ender 5 plus direct drive.zip]] | [[Media:Prusaslicer - ender 5 plus direct drive.zip]] | ||
- to load the filament push it all the way through the tubing to the direct drive extruder, then can use the "pickle rick" knob on the extruder to load it down to the nozzle | - to load the filament push it all the way through the tubing to the direct drive extruder, then can use the "pickle rick" knob on the extruder to load it down to the nozzle | ||
- always check the first layer!!! there is live z-adjust on the touchscreen called "baby steps" | - always check the first layer!!! there is live z-adjust on the touchscreen called "baby steps" | ||