Hacky New Years/2023: Difference between revisions

Hacky New Years/2023 (view source)

810 bytes added , 23 December 2022

no edit summary

173

edits

@@ Line 1: / Line 1: @@
+= Hacky New Years 2023 Plaque =
 = Assembly Instructions =
-TBD
+== Included Parts ==
+* 1x PCB Panel
+* 1x 3x2 0.1" Pin Header
+* 1x 3x1 0.1" Right Angle Pin Header
+* 1x ATTINY25 MCU (pre-programed)
+== Through Hole Soldering ==
+All surface mount components come presoldered to the PCB, but there are some through hole components need to be added to complete assembly.
+# Solder down ATTiny25 micro controller.
+This should already be taped down to your PCB panel in the correct orientation, but verify the chip orientation matches that of the silkscreen.
+ToDo: Photo
+# Solder right angle header to 'CN-Tower-Resistor' PCB
+# Solder programming header to Main PCB (Optional)
+# Separate 'CN-Tower-Resistor' PCB and Main PCB
+# Solder'CN-Tower-Resistor' PCB perpendicular to Main PCB
 = FAQ =
-'''Q:''' How do we power the Plaque?
+;'''Q:''' How do we power the Plaque?
-'''A:''' Since ever hackers space a bit different, we left it as an exercise to those spaces on how they want to get regulated 5V to the labelled pins on the programming header.
+:'''A:''' Provide regulate 5V programming header, either via the pin header if installed, or soldered directly to the vias if you choose to leave it off. Since ever hacker space is a bit different we left it as an exercise to those spaces.
 = Design & Credits =