P-touch Label Maker Manual: Difference between revisions
Jump to navigation
Jump to search
Basic QR code logic.
(Created page with "== PT-P710BT P-touch CUBE Plus == * [https://www.brother.ca/en/p/PTP710BT Manufactures Page] Software is setup on shared computer HL0002 == Second manual p-touch == F...") |
(Basic QR code logic.) |
||
| Line 4: | Line 4: | ||
Software is setup on shared computer [[HL0002]] | Software is setup on shared computer [[HL0002]] | ||
== Creating QR codes == | |||
There's a file on the shared computer - in the saved labels - `Hacklab-QRcode-Tag.lbx` | |||
* Determine the next number in the sequence - i.e. HL0079 -> HL0080 | |||
* Create the page at [https://knowledge.hacklab.to/wiki/HL00XX] | |||
** You can either immediately create a redirect (see [https://knowledge.hacklab.to/wiki/HL0001&redirect=no]) | |||
* Change the URL embedded in the QR Code | |||
* Change the text of the label | |||
* SAVE THE LABEL | |||
** This is how we determine the next number otherwise you have to search HL00* in the wiki. | |||
* Print it out. | |||