250
edits
3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
|||
| Line 43: | Line 43: | ||
* Use the glue on the smooth PEI sheet (the stock sheet that has writing on it). Don't forget to add glue to the purge line! (left most side of the bed) | * Use the glue on the smooth PEI sheet (the stock sheet that has writing on it). Don't forget to add glue to the purge line! (left most side of the bed) | ||
* PLA is printed with the lid off!!!! PETG and ABS can be printed with the lid on. | * PLA is printed with the lid off!!!! PETG and ABS can be printed with the lid on. | ||
=== Rapid filament vs. Regular filament === | |||
*Printing with normal PETG: can get weak layer adhesion at 240C nozzle temp, although the print will look completely fine. Printing normal PETG at 260C (can do 255 or even 250 if you dare) resulted in strong layer adhesion and the prints came out fine | |||
*Printing with rapid PETG: seems to be fine at 240C, but the profiles are set up for 245C just to ensure strong layer adhesion because the K1 is really cranked up to the max speed lol, the future!!! Printing the rapid PETG at 260C resulted in droopy overhangs and more stringing. | |||