Ultimaker: Difference between revisions
Jump to navigation
Jump to search
no edit summary
m (→Current Status: Updated link) |
No edit summary |
||
| Line 1: | Line 1: | ||
== Current Status == | == Current Status == | ||
We currently have two Ultimakers, one in a lightly modified but working state and the other needing some of the same modifications but potentially working. | We currently have two Ultimakers, one in a lightly modified but working state and the other needing some of the same modifications but potentially working. | ||
| Line 20: | Line 19: | ||
Packing Factor: 1 | Packing Factor: 1 | ||
|N/A | |N/A | ||
|} | |||
==Material Feedstock== | |||
Our current preferred supplier of good PLA is Montreal based [http://voxelfactory.com/ Voxelfactory], their PLA is reasonably priced and ships fast. | |||
All PLA is hygroscopic (water absorbing) and exposure to moisture over time degrades the material. We have a (mostly) airtight latching storage bin with desiccant (CaCl[sub]2[/sub]) to reduce moisture internally. Store PLA inside this bin, keep it closed and open it only when needed. | |||
NB: ABS and other mystery inventory is stored in this bin as well! | |||
===Current Inventory=== | |||
{| cellpadding="5" cellspacing="0" border="1" | |||
! | |||
!Material | |||
!Diameter | |||
!Notes | |||
|- | |||
|Orange 3mm | |||
|2.934mm | |||
|Partial spool | |||
|} | |} | ||