Home Assistant Demo Lab: Difference between revisions
Jump to navigation
Jump to search
(Block diagram of Demo Lab devices.) |
(Heading Level Adjustments) |
||
| Line 2: | Line 2: | ||
[[File:Home Assistant Demo Lab side 2024-12-23.jpg|thumbnail]] | [[File:Home Assistant Demo Lab side 2024-12-23.jpg|thumbnail]] | ||
= Quick Start Guide = | |||
The Home Assistant Demo Lab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection. | The Home Assistant Demo Lab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection. | ||
== Setup == | |||
# Retrieve the Demo Lab from member storage, cube '''S4'''. | # Retrieve the Demo Lab from member storage, cube '''S4'''. | ||
| Line 16: | Line 16: | ||
## '''Wait 2 mins''' for the home assistant server to stabilize. | ## '''Wait 2 mins''' for the home assistant server to stabilize. | ||
== Usage == | |||
Join the Demo Lab's dedicated WIFI, or wired network port on the Demo Lab. | Join the Demo Lab's dedicated WIFI, or wired network port on the Demo Lab. | ||
| Line 32: | Line 32: | ||
[[File:Home-Assistant-Demo-Lab.drawio.png]] | [[File:Home-Assistant-Demo-Lab.drawio.png]] | ||
== Shutdown / Storage Procedure == | |||
Gracefully turn off Home Assistant server. | Gracefully turn off Home Assistant server. | ||
| Line 42: | Line 42: | ||
# Return the Demo Lab to member storage, cube '''S4'''. | # Return the Demo Lab to member storage, cube '''S4'''. | ||
= Lab Configuration / Reset Instructions = | |||
If you are preparing for a workshop, or need the Demo Lab returned to a clean slate. Please review and follow the [[Home_Assistant_Demo_Lab_Configuration|Configuration Document]]. | If you are preparing for a workshop, or need the Demo Lab returned to a clean slate. Please review and follow the [[Home_Assistant_Demo_Lab_Configuration|Configuration Document]]. | ||
Latest revision as of 00:52, 24 December 2024
Quick Start Guide
The Home Assistant Demo Lab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection.
Setup
- Retrieve the Demo Lab from member storage, cube S4.
- The hot-desks and electronics bench have power and wired network connections available.
- Attach hacklab wired network to WAN port (blue) on the Router (HL0087).
- Attach Demo Lab powerbar to power and switch it on.
- Wait 1 min, this is to allow the router to boot and stabilize.
- Power on Home Assistant server (HL0088)
- Wait 2 mins for the home assistant server to stabilize.
Usage
Join the Demo Lab's dedicated WIFI, or wired network port on the Demo Lab.
- DEMOLAB-5 / DEMOLAB
You *MUST* be downstream of the Demo Lab's router to work with devices and services in the Demo Lab.
Usernames and passwords are documented on a physical card included with the Demo Lab. These may be updated and changed during an environment refresh, please refer to the card at each use.
Shutdown / Storage Procedure
Gracefully turn off Home Assistant server.
- On the Home Assistant's Hardware Page
- Power Symbol, Top Right Corner
- "Shut down system"
- It is now safe turn off the Demo Lab's powerbar and unplug power and networking. The Router and Zigbee Router are sudden power-loss tolerant.
- Return the Demo Lab to member storage, cube S4.
Lab Configuration / Reset Instructions
If you are preparing for a workshop, or need the Demo Lab returned to a clean slate. Please review and follow the Configuration Document.