Home Assistant Demo Lab: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
(Moved Configuration information to Separate Document) |
||
| Line 15: | Line 15: | ||
# Power on Home Assistant server ([[HL0088]]) | # Power on Home Assistant server ([[HL0088]]) | ||
## '''Wait 2 mins''' for the home assistant server to stabilize. | ## '''Wait 2 mins''' for the home assistant server to stabilize. | ||
=== Usage === | === Usage === | ||
| Line 24: | Line 23: | ||
You *MUST* be downstream of the Demo Lab's router to work with devices and services in the Demo Lab. | You *MUST* be downstream of the Demo Lab's router to work with devices and services in the Demo Lab. | ||
Usernames and passwords are documented on a physical card included with the Demo Lab. These may be updated and changed during an environment refresh, please refer to the card at each use. | Usernames and passwords are documented on a physical card included with the Demo Lab. These may be updated and changed during an environment refresh, please refer to the card at each use. | ||
| Line 31: | Line 28: | ||
* [http://homeassistant.demolab.in.hacklab.to:8123/ Home Assistant Server] | * [http://homeassistant.demolab.in.hacklab.to:8123/ Home Assistant Server] | ||
* [http://openwrt.demolab.in.hacklab.to/cgi-bin/luci/ OpenWRT Router] | * [http://openwrt.demolab.in.hacklab.to/cgi-bin/luci/ OpenWRT Router] | ||
* [http://SLZB-06.demolab.in.hacklab.to | * [http://SLZB-06.demolab.in.hacklab.to/ Zigbee Gateway] | ||
=== Shutdown / Storage Procedure === | === Shutdown / Storage Procedure === | ||
| Line 45: | Line 42: | ||
== Lab Configuration / Reset Instructions == | == Lab Configuration / Reset Instructions == | ||
If you are preparing for a workshop, or need the Demo Lab returned to a clean slate. Please review and follow the [[Home_Assistant_Demo_Lab_Configuration|Configuration Document]]. | |||
Revision as of 23:03, 23 December 2024
Quick Start Guide
The Home Assistant Demo Lab is a self-contained network + server assembled into a ready to go package that only require a single power and upstream network connection.
Setup
- Retrieve the Demo Lab from member storage, cube S4.
- The hot-desks and electronics bench have power and wired network connections available.
- Attach hacklab wired network to WAN port (blue) on the Router (HL0087).
- Attach Demo Lab powerbar to power and switch it on.
- Wait 1 min, this is to allow the router to boot and stabilize.
- Power on Home Assistant server (HL0088)
- Wait 2 mins for the home assistant server to stabilize.
Usage
Join the Demo Lab's dedicated WIFI, or wired network port on the Demo Lab.
- DEMOLAB-5 / DEMOLAB
You *MUST* be downstream of the Demo Lab's router to work with devices and services in the Demo Lab.
Usernames and passwords are documented on a physical card included with the Demo Lab. These may be updated and changed during an environment refresh, please refer to the card at each use.
Shutdown / Storage Procedure
Gracefully turn off Home Assistant server.
- On the Home Assistant's Hardware Page
- Power Symbol, Top Right Corner
- "Shut down system"
- It is now safe turn off the Demo Lab's powerbar and unplug power and networking. The Router and Zigbee Router are sudden power-loss tolerant.
- Return the Demo Lab to member storage, cube S4.
Lab Configuration / Reset Instructions
If you are preparing for a workshop, or need the Demo Lab returned to a clean slate. Please review and follow the Configuration Document.