PCNC1100
Basic Information
- The Tormach was donated by Autodesk
- Tormach PCNC 1100 tech specs
- Resolution: 1 tenth / 0.0001" / 2.54 micron / 1.26262e-8 furlongs
- 1.5HP, 100 to 5140 RPM (two speeds, belt adjust)
- Feed Rate: 110 IPM (X,Y) 90 IPM (Z)
- Fixture plate: Grid of 3/8" x 16TPI threaded holes
- TODO create 3D model
- TODO buy holder clamp set
Tool Setter
- TODO
Work Probe
- TODO
4th Axis The Tormach has an 8" three-jaw chuck, normally mounted as an "A" (along "X") axis. It could also be rotated to be vertical for the "C" axis (along "Z").
- TODO
Preventative Maintenance
- Way oiler - pull out one full stroke before each use, and again every 30 minutes of runtime
- Air oiler - check for oil (behind the machine)
CNC Controller
- Uses PathPilot
- TODO
Tool Holder
- TTS - Tormach Tooling System
| Material + Tool | SFM with Lubricant | SFM with Flood Coolant |
|---|---|---|
| 6061 Aluminum + 1/2" HSS endmill | Cell 2 | Cell 3 |
| Row header A | Cell B | Cell C |