250
edits
3D Printers/Creality K1: Difference between revisions
Jump to navigation
Jump to search
→Note about noise and cooling
| Line 53: | Line 53: | ||
* The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan"), making an annoying high pitch noise. At ~60% or below the pitch is bearable, upon further testing 75% speed is bearable. | * The fan in the print head is really noisy when running fast ("model fan" or "part cooling fan"), making an annoying high pitch noise. At ~60% or below the pitch is bearable, upon further testing 75% speed is bearable. | ||
* The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | * The official creality PETG profile has the model fan at ~90% and the side fan at 0%, however this is so noisy and annoying lol | ||
* Rana has changed his PETG cooling profile so the model fan is max 75% and the side fan is | * Rana has changed his PETG cooling profile so the model fan is max 75% and the side fan is set to 75% (although it seems like the side fan speed is adjusted by the printer as per cooling needs). These settings are on the soldering bench computer too. | ||
**Note for very small layer times the model fan still goes above 90% and makes the annoying sound | **Note for very small layer times the model fan still goes above 90% and makes the annoying sound | ||
* If you wish to change these settings, they are in the material profile: | * If you wish to change these settings, they are in the material profile: | ||