Type A

From Hacklab.TO Public Wiki
Revision as of 01:09, 2 January 2016 by Saskeah (talk | contribs)
Jump to navigation Jump to search

This page documents Type A

Status

  • This Ultimaker is currently functional and in reasonable to good condition!
  • Uses 1.75mm PLA filament.
  • It is managed and accessible from the web GUI: http://octopi.hacklab.to/

Machine Log

Date Notes Entry By
January 1 2016 Print head not extruding. Mechanics and octopi commands seem to be working fine, but filament does not extrude from print head. emmy
Retrieved from "https://knowledge.hacklab.to//index.php?title=Type_A&oldid=869"