3D Printers/FlashForge Creator Pro: Difference between revisions

Jump to navigation Jump to search
Request for new Slicr config link
(Request for new Slicr config link)
Line 25: Line 25:


Detailed instructions are here -- http://data.flamy.ca/printer_config/doc/cretor_pro_config.html
Detailed instructions are here -- http://data.flamy.ca/printer_config/doc/cretor_pro_config.html
This link is dead, are there instructions anywhere else? --[[User:Hiker|Hiker]] ([[User talk:Hiker|talk]]) 19:14, 22 April 2018 (EDT)


It is still possible to use makerbot software, just generate an .x3g file instead of .gcode and upload it to octoprint.
It is still possible to use makerbot software, just generate an .x3g file instead of .gcode and upload it to octoprint.

Navigation menu