3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 19:10, 16 April 2017
, 16 April 2017→Print Settins
| Line 44: | Line 44: | ||
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings. | These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings. | ||
Use Cubic Infill (Available only in Slic3r prusa edition), as it provides rigidity in all directions [ | Use Cubic Infill (Available only in Slic3r prusa edition), as it provides rigidity in all directions [http://www.prusaprinters.org/introducing-slic3r-prusa-edition/] and doesn't make printer resonate. | ||
Do not use honeycomb -- as at the speeds of the default settings, it will cause printer to resonate and skip. | Do not use honeycomb -- as at the speeds of the default settings, it will cause printer to resonate and skip. | ||
PLA: | |||
'''PLA:''' | |||
In Slic3r in Fillament Settings tab, '''Right Extruder''' filament profile and in Print Settings tab, '''Fast''' print profile. | In Slic3r in Fillament Settings tab, '''Right Extruder''' filament profile and in Print Settings tab, '''Fast''' print profile. | ||
| Line 61: | Line 63: | ||
Bed: 60 | Bed: 60 | ||
ABS: | |||
'''ABS:''' | |||
In Slic3r in Fillament Settings tab, '''ABS Right''' filament profile and in Print Settings tab, '''ABS_first_layer''' print profile. | In Slic3r in Fillament Settings tab, '''ABS Right''' filament profile and in Print Settings tab, '''ABS_first_layer''' print profile. | ||