3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 19:08, 16 April 2017
, 16 April 2017→Print Settins
(→Usage) |
|||
| Line 43: | Line 43: | ||
These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings. | These are general printer settings that work. If filament has different temperature settings, follow filament temperature settings. | ||
Use Cubic Infill (Available only in Slic3r prusa edition), as it provides rigidity in all directions [[Prusa Cubic Infill]]and doesn't make printer resonate. | |||
Do not use honeycomb -- as at the speeds of the default settings, it will cause printer to resonate and skip. | |||
PLA: | PLA: | ||
In Slic3r in Fillament Settings tab, '''Right Extruder''' filament profile and in Print Settings tab, '''Fast''' print profile. | |||
First Layer: | First Layer: | ||
| Line 56: | Line 62: | ||
ABS: | ABS: | ||
In Slic3r in Fillament Settings tab, '''ABS Right''' filament profile and in Print Settings tab, '''ABS_first_layer''' print profile. | |||
For abs you '''absolutely have to''' have a heated chamber, or ABS prints not stick to kapton tape no matter what. | For abs you '''absolutely have to''' have a heated chamber, or ABS prints not stick to kapton tape no matter what. | ||
| Line 67: | Line 76: | ||
Other Layers: | Other Layers: | ||
Fillament: | Fillament: 235 | ||
Bed: 95 | Bed: 95 | ||