3D Printers/FlashForge Creator Pro: Difference between revisions
Jump to navigation
Jump to search
3D Printers/FlashForge Creator Pro (view source)
Revision as of 19:01, 16 April 2017
, 16 April 2017→Print Settins
(→Usage) |
|||
| Line 54: | Line 54: | ||
ABS: | ABS: | ||
For abs you '''absolutely have to''' have a heated chamber, or ABS prints not stick to kapton tape no matter what. | |||
In order to construct heated chamber -- cover the front of printer with a piece of plywood or MDF from the workshop and put some cardboard on top of the printer out of extruder path so the heat escapes more slowly. Pre-heating heaated bed for 5 minutes before starting helps a lot -- set the Bed temperature to 100C in Octopi temperature tab. | |||
It's better to start ABS prints towards the back of the printer where ambient temperature is more stable. To disable auto-centering, in Slic3r Prusa Edition go to File --> Preferences then uncheck 'Auto-center Parts'. | |||
First Layer: | First Layer: | ||
| Line 61: | Line 66: | ||
Other Layers: | Other Layers: | ||
Fillament: 230 | Fillament: 230 | ||
Bed: | Bed: 95 | ||
==Octoprint at octopi4.hacklab.to== | ==Octoprint at octopi4.hacklab.to== | ||