Laser Manual: Difference between revisions
Jump to navigation
Jump to search
→General Workflow Overview
(→References: Edited Section Title) |
|||
| Line 17: | Line 17: | ||
# Place workpiece into laser. | # Place workpiece into laser. | ||
# Set beam power to OFF using override switch. | # Set beam power to OFF using override switch. | ||
# Power ON laser control panel. | # Power ON laser control panel. The 'AMP ENABLE' and 'LASER ON' LEDs will blink once and turn off. | ||
# Toggle machine power in AXIS to ON. The 'AMP ENABLE' LED should come on. | # Toggle machine power in AXIS to ON. The 'AMP ENABLE' LED should come on. | ||
# Home all axes. | # Home all axes. | ||