Makerbot Customization: Difference between revisions

From Hacklab.TO Public Wiki
Jump to navigation Jump to search
m (11 revisions: Import 3D printer articles with history)
 
(4 intermediate revisions by 2 users not shown)
Line 1: Line 1:
== Cupcake Refurb Project 2013 ==
== Cupcake Refurb Project 2013 ==
As of June 2013, a number of major upgrades have been performed / are scheduled to make the cupcake more useful and relevent.
From June to August 2013, a number of major upgrades have been performed to make the cupcake more useful and relevent.


===Status===
===Status===
The hardware is in place, and some cura profiles are available to download. Please make sure to set the bed size correctly in the cura preferences. (also confirm steps_per_E is correct.) The extruder clogs easy, and isn't very adjustable right now.
Done. The cupcake is now as usable as the ultimakers. (Same software workflow.) - Print quality is not as high, but sufficient for mechanical parts.


Otherwise, the printer is usable in its current state. Printrun is available on the connected raspi.
===Completed Work===
 
* X,Y mendel style with 10 bearings/axis [ http://www.thingiverse.com/thing:3697] [http://www.thingiverse.com/thing:4239]- PLA printed Y part cracked, only 9 bearings installed. Still runs well.
===Completed===
* X,Y mendel style with 10 bearings/axis <Thingivere link here> - PLA printed Y part cracked, only 9 bearings installed. Still runs well.
* Wade's extruder for cupcake [http://www.thingiverse.com/thing:10007]
* Wade's extruder for cupcake [http://www.thingiverse.com/thing:10007]
** Hobbed bolt + gear from ultimaker spares
** Hobbed bolt + gear from ultimaker spares
Line 21: Line 19:
* Z endstops
* Z endstops
* Wiring and connecting ABP.
* Wiring and connecting ABP.
* Cura plugin for ABP at end of print?
* Cura plugin for ABP at end of print
* Power status LED (Thanks Sen!)
* LED Strip - Regulator runs hot though, usually unpluged.
* Z Axis replacement - [http://www.thingiverse.com/thing:7954]
* Crappy Bed leveler


===Todo / WIP===
===Todo / WIP===
* LEDs! - (one strip in place, needs configuration)
* Need a bed leveler design which doesn't add wobble to prints
* Z axis replacement (MiZ z-rider?) -- Biggest flaw in current prints is Z-wobble.
* ABP tends to be a bit wavvy. Investigate paper/kapton option or metal foil for replacement belt.


===Parameters and notes===
===Parameters and notes===

Latest revision as of 01:27, 16 June 2014

Cupcake Refurb Project 2013

From June to August 2013, a number of major upgrades have been performed to make the cupcake more useful and relevent.

Status

Done. The cupcake is now as usable as the ultimakers. (Same software workflow.) - Print quality is not as high, but sufficient for mechanical parts.

Completed Work

  • X,Y mendel style with 10 bearings/axis [ http://www.thingiverse.com/thing:3697] [1]- PLA printed Y part cracked, only 9 bearings installed. Still runs well.
  • Wade's extruder for cupcake [2]
    • Hobbed bolt + gear from ultimaker spares
    • Stepper based extruder - stepper borrowed from ultimaker.
  • Old Ultimaker (ramps-like) board with arduino Mega that has to be returned to Fumon - Sen to provide alternative?
  • X,Y endstops implemented with random mechanical switches found around the lab.
  • Tuning: X,Y,Z Steps_per_unit
  • Raspi configured with arch and printrun.
  • Extruder tuned, replaced gear with 3d printed one (was using old wood ultimaker gear, now using same type of gear as the ultimaker.)
  • took apart, cleaned out the makergear extruder.
  • Toolchain integration (Cura profile/prontserv) - Note: Cura preferences must be altered to match machine dimentions.
  • Z endstops
  • Wiring and connecting ABP.
  • Cura plugin for ABP at end of print
  • Power status LED (Thanks Sen!)
  • LED Strip - Regulator runs hot though, usually unpluged.
  • Z Axis replacement - [3]
  • Crappy Bed leveler

Todo / WIP

  • Need a bed leveler design which doesn't add wobble to prints
  • ABP tends to be a bit wavvy. Investigate paper/kapton option or metal foil for replacement belt.

Parameters and notes

  • Using Marlin firmware. Full configuration to be posted on github once it's more stable.
  • Motor model: KYSAN SKU: 1123029. Using 12V, 0.4A. (xyz only, extruder = better motor.) - Set pololu ref voltage to a bit under 0.16v.) [4]
  • PID values + thermo values being played with. Default values overshoot hotend significantly.
    • See reference values here: [5]

Historical

The Hacklab has made a number of customization to our Makerbot:

  • Thermocouple in the Plastruder heater instead of the default thermocouple (including adding converter board for signal)
  • Heated build platform