Metal Bandsaw: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary Tag: Mobile edit |
||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 28: | Line 28: | ||
=== Saw blade === | === Saw blade === | ||
Currently: 1/2" wide metal blade from BusyBee | Currently: 1/2" wide metal blade from BusyBee | ||
*https://www.busybeetools.com/products/blade-64-1-2in-x-1-2in-14-raker-l-tension.html | |||
*https://www.busybeetools.com/products/blade-64-1-2in-x-1-2in-10-raker-metal.html | |||
The machine has over an inch of adjustment in the top wheel position so it fits blades from about 63" to 65.5" long. | The machine has over an inch of adjustment in the top wheel position so it fits blades from about 63" to 65.5" long. | ||
| Line 54: | Line 56: | ||
=== Table === | === Table === | ||
The machine can be used as a vertical band saw by attaching the table stored in the chip pan of the saw | The machine can be used as a vertical band saw by attaching the table stored in the chip pan of the saw, or in the arm of the wooden storage shelf above it. | ||
# Unplug machine | # Unplug machine | ||
# Unscrew two big flat | # Unscrew two big flat socket cap screws at the top of the bottom blade guide | ||
# Remove small guide plate | # Remove small guide plate | ||
# Place table on the blade guide | # Place table on the blade guide | ||