Type A: Difference between revisions

Type A (view source)

No change in size , 13 June 2018

283

edits

@@ Line 111: / Line 111: @@
 '''Experimental'''
 * Enable Costing: SELECTED
-** Costing Volume: 1.0 mm<sup>3</sup> (aprox. 150% the Cura 3 default value)<br />==> The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions.<br />
+** Costing Volume: 0.1 mm<sup>3</sup> (aprox. 150% the Cura 3 default value)<br />==> The '''new''' (experimental) Costing Feature of Cura 3 is what enables the above settings to provide a very noticeable improvement in the PETG print quality. Where using Costing together with a small retraction works far far better than using just retractions.<br />
 * Alternate Skin Rotation: SELECTED
 <br />&nbsp;