Type A: Difference between revisions
Jump to navigation
Jump to search
→Cura 3 Settings for this Printer: update for Cura 3.3.1 having Printer & Extruder tabs.
(→Recommended Filament Settings: CORRECT Coasting Volume value) |
(→Cura 3 Settings for this Printer: update for Cura 3.3.1 having Printer & Extruder tabs.) |
||
| Line 122: | Line 122: | ||
==Cura 3 Settings for this Printer== | ==Cura 3 Settings for this Printer== | ||
In Cura 3.3.1, to use the below settings, create a '''Custom FDM printer''', then edit the '''Machine Settings''' for that printer to contain the following:<br /> | |||
=== Printer tab === | |||
'''Printer Settings''' | '''Printer Settings''' | ||
* X (Width): 254 mm | * X (Width): 254 mm | ||
| Line 138: | Line 139: | ||
* Gantry height: 110.0 mm | * Gantry height: 110.0 mm | ||
* Number of Extruders: 1 | * Number of Extruders: 1 | ||
'''Start Gcode''' | '''Start Gcode''' | ||
<code> | <code> | ||
| Line 168: | Line 167: | ||
G90 ;absolute positioning | G90 ;absolute positioning | ||
</code> | </code> | ||
=== Extruder 1 tab === | |||
* Material Diameter: 1.75 mm | |||
* Nozzle size: 0.4 mm | |||
==Machine Log== | ==Machine Log== | ||