Type A: Difference between revisions
Jump to navigation
Jump to search
→Recommended Filament Settings: Finish Cura 3.4.1 PETG update (forgotten settings)
(→Cura 3 Settings for this Printer: housekeeping edit (3.3.1 to 3.4.1)) |
(→Recommended Filament Settings: Finish Cura 3.4.1 PETG update (forgotten settings)) |
||
Line 155: | Line 155: | ||
** Coasting Speed: 100 % | ** Coasting Speed: 100 % | ||
* Alternate Skin Rotation: SELECTED (UNSELECT this when using Supports.) | * Alternate Skin Rotation: SELECTED (UNSELECT this when using Supports.) | ||
* Use Adaptive Layers: SELECTED | |||
** Adaptive Layers Maximum Variation: 0.05 mm | |||
** Adaptive Layers Variation Step Size: 0.01 mm | |||
** Adaptive Layers Threshold: 180 (Default value is 200)<br />==> 180 seems to provide about same quality & speed as using a 0.1mm layer height with PLA on Ultimaker 1. | |||
<br /> | <br /> | ||
NOTES: | NOTES: |