Type A: Difference between revisions
Jump to navigation
Jump to search
→Recommended Filament Settings: update for WHY given PETG layer heights
(→Status: update after work done & problems found) |
(→Recommended Filament Settings: update for WHY given PETG layer heights) |
||
Line 65: | Line 65: | ||
'''Quality''' | '''Quality''' | ||
* Layer Height: 0.225 mm (Using "Adaptive Layers", so this really means from 0.175mm to 0.275mm) | * Layer Height: 0.225 mm (Using "Adaptive Layers", so this really means from 0.175mm to 0.275mm)<br />==> Using a Layer Height more than 2.75mm or less than 1.75mm seems to cause a LOT more PETG build-up on the outside of the nozzle. | ||
* Initial Layer Height: 0.3 mm | * Initial Layer Height: 0.3 mm | ||
* Line Width: 0.35 mm ('''smaller''' than the 0.4mm nozzle) | * Line Width: 0.35 mm ('''smaller''' than the 0.4mm nozzle) |