Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: Broken with new problem
(→Features: don't use over 240C) |
(→Status: Broken with new problem) |
||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
* ''' | * '''DOWN''' ... Nichrome Wire hotend heater broke | ||
* Loaded with 1.75mm Black PETG | * Loaded with 1.75mm Black PETG | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||