Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Known Issues and Fixes: wiki markup typo fix
m (→Status: add filament micrometer reading) |
m (→Known Issues and Fixes: wiki markup typo fix) |
||
| Line 15: | Line 15: | ||
'''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals & Spool3D.ca are 2 sources for that.) Most PETG filaments have a maximum recommended temperature of 260°C to 265°C. | '''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals & Spool3D.ca are 2 sources for that.) Most PETG filaments have a maximum recommended temperature of 260°C to 265°C. | ||
'''Preliminary CURA 15 settings for MG Chemicals Black PETG''' | '''Preliminary CURA 15 settings for MG Chemicals Black PETG''' | ||
Basic Tab: | Basic Tab: | ||
* Layer Height: 0.2mm (Don't use less than this with PETG.) | * Layer Height: 0.2mm (Don't use less than this with PETG.) | ||