Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Status: toooo late typo fix
(→Status: Remove line for Black Filaments.ca Black PLA) |
m (→Status: toooo late typo fix) |
||
| Line 7: | Line 7: | ||
<onlyinclude> | <onlyinclude> | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
** PETG in printer -- loaded with 1.75mm Blue iPrint-3D PETG | ** PETG in printer -- loaded with 1.75mm Blue iPrint-3D PETG. | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | * [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | ||