Type A: Difference between revisions
Jump to navigation
Jump to search
no edit summary
No edit summary |
No edit summary |
||
Line 35: | Line 35: | ||
|January 5 2016 | |January 5 2016 | ||
|Pinch wheel cleaned with compressed air. Bed re-taped and cleaned with isopropyl alcohol | |Pinch wheel cleaned with compressed air. Bed re-taped and cleaned with isopropyl alcohol. Cold push clean of extruder head repeated for good measure (and during a sticky moment unicycledave took the head apart and removed some extra gunk). Z axis adjusted. Attempted a calibration object, z axis held bed too far from the print head. Attempted again with adjustment, print head was too close and scraped the tape. Good news: printer totally functional. Bad news: Z axis still needs tweaking, and part of the bed needs to be re-taped again. | ||
|emmy (saskeah) | |emmy (saskeah) | ||