Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Features: update changed nozzle size
(→Status: Update based on what happened this week) |
m (→Features: update changed nozzle size) |
||
| Line 16: | Line 16: | ||
* 254 x 230 x 230 mm print volume | * 254 x 230 x 230 mm print volume | ||
* 1.75mm filament | * 1.75mm filament | ||
* . | * .4mm nozzle | ||
* Temperatures readings are lower than Ultimakers (e.g.: 190 for PLA compared to 210 on Ultimaker) | * Temperatures readings are lower than Ultimakers (e.g.: 190 for PLA compared to 210 on Ultimaker) | ||
* It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/''' | * It is managed and accessible from the web GUI: '''http://octopi3.hacklab.to/''' | ||