Type A: Difference between revisions
Jump to navigation
Jump to search
Add Known Issues and Fixes section w/ CURA 15 PETG settings
m (→Machine Log: small updates.) |
(Add Known Issues and Fixes section w/ CURA 15 PETG settings) |
||
Line 10: | Line 10: | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] | * [[3D_Printers#Cura_15|Cura 15 Settings here]] | ||
* '''http://octopi3.hacklab.to/'''</onlyinclude> | * '''http://octopi3.hacklab.to/'''</onlyinclude> | ||
==Known Issues and Fixes== | |||
'''Preliminary CURA 15 settings for MG Chemicals Black PETG''' | |||
Basic Tab: | |||
* Layer Hight used: 0.15mm (PETG likes more space, so chose this instead of 0.1mm) | |||
* Fill Density used 50% (Just chose something often used with PLA) | |||
* Retraction Enabled | |||
** Z Hop when Retracting: 0.5mm (NO Z Hop used with PLA) | |||
* Print Speed: 30mm/s (Down from 50mm/s for PLA) | |||
* Pringing Temp.: 220°C | |||
* Filament Diameter: whatever a micrometer reads for this reel. | |||
* Flow: 80% | |||
* Nozzle Size: 0.4mm | |||
Advanced Tab: | |||
* Retraction Distance: 3.5mm (Down from 4.5mm for PLA) | |||
* Travel Speed: 250mm/s (Up from 150mm/s for PLA) | |||
== Features == | == Features == | ||
Line 24: | Line 41: | ||
{| cellpadding="5" cellspacing="0" border="1" | {| cellpadding="5" cellspacing="0" border="1" | ||
!Date | !Date | ||
!Notes | !Notes | ||
!Entry By | !Entry By |