Type A: Difference between revisions
Jump to navigation
Jump to search
→Known Issues and Fixes: update PETG settings for new head
(→Known Issues and Fixes: update PETG settings for new head) |
|||
| Line 15: | Line 15: | ||
Basic Tab: | Basic Tab: | ||
* Retraction Enabled | * Retraction Enabled | ||
** Z Hop when Retracting: 0.5mm (NO Z Hop used with PLA) | ** Z Hop when Retracting: 0.5mm (NO Z Hop used with PLA) | ||
* Print Speed: 30mm/s (Down from 50mm/s for PLA) | * Print Speed: 30mm/s (Down from 50mm/s for PLA) | ||
* Pringing Temp.: | * Pringing Temp.: 230°C | ||
* Filament Diameter: whatever a micrometer reads for this reel. | * Filament Diameter: whatever a micrometer reads for this reel. | ||
* Flow: 80% | * Flow: 80% | ||