Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Known Issues and Fixes
(→Known Issues and Fixes: Update PETG info. based on use) |
|||
Line 35: | Line 35: | ||
* The above settings are a "best compromise", to get '''good''' results, without limiting the print speed any more than necessary. | * The above settings are a "best compromise", to get '''good''' results, without limiting the print speed any more than necessary. | ||
* Check the print head periodically. If PETG is building up on that, use the Black Bent Noise Tweezers to grab the PETG on the nozzle tip. | * Check the print head periodically. If PETG is building up on that, use the Black Bent Noise Tweezers to grab the PETG on the nozzle tip. | ||
* | * To print with PETG, start with a '''clean''' nozzle, and the 1st layer (inside the Brim) needs to be perfect. | ||
== Features == | == Features == |