Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Known Issues and Fixes: add iPrint-3D
(→Recommended Filament Settings: small updates) |
m (→Known Issues and Fixes: add iPrint-3D) |
||
| Line 16: | Line 16: | ||
* This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. | * This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. | ||
'''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals | '''IMPORTANT:''' All PETG filaments are '''not''' the same. This printer can '''only''' use PETG filaments where the maximum recommended printing temperature is '''240°C'''. (MG Chemicals, Spool3D.ca & iPrint-3D are some sources for that.) Most PETG filaments have a maximum recommended temperature of 260°C to 265°C. | ||
===Recommended Filament Settings=== | ===Recommended Filament Settings=== | ||