Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update based on usage
(→Known Issues and Fixes: fiberglass plate *fail* ... remove any mention of that.) |
(→Status: update based on usage) |
||
| Line 6: | Line 6: | ||
==Status== | ==Status== | ||
<onlyinclude> | <onlyinclude> | ||
'''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) | '''Printbed is warped''', with the zero stop set for a high center. (Use a large brim to help keep your prints "stuck".) So if needed, turn the Z-axis rod '''clockwise''' to bring the print head slightly closer to the build platform. Also, the X-axis shifts (due to a belt loosening) have been a problem. So don't try loooong prints, until this printer is '''proven''' to be reliable. | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||