Type A: Difference between revisions
Jump to navigation
Jump to search
m
→Status: Update for filament on printer.
(→Known Issues and Fixes: add ipg blue tape note) |
m (→Status: Update for filament on printer.) |
||
Line 9: | Line 9: | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* Loaded with 1.75mm | * Loaded with 1.75mm Filaments.ca Black PLA | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | * [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | ||
* '''http://octopi3.hacklab.to/'''</onlyinclude> | * '''http://octopi3.hacklab.to/'''</onlyinclude> |