Type A: Difference between revisions
Jump to navigation
Jump to search
→Known Issues and Fixes: remove IPG tape note. (not using) & add NO atomic pull note.
(→Machine Log: update for work done.) |
(→Known Issues and Fixes: remove IPG tape note. (not using) & add NO atomic pull note.) |
||
Line 24: | Line 24: | ||
==Known Issues and Fixes== | ==Known Issues and Fixes== | ||
* DO NOT | * '''DO NOT''' do an "Atomic Pull" or "Cold Pull" on this 3D Printer!!! Doing that '''will break the heatbreak''' (at the nozzle end). | ||
* Before starting to print, '''make sure the head heatsink fan is ON'''. If the connector on the cable came loose, then the filament '''will''' jam once that heatsink becomes too hot. | * Before starting to print, '''make sure the head heatsink fan is ON'''. If the connector on the cable came loose, then the filament '''will''' jam once that heatsink becomes too hot. | ||
* This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. | * This Printer has a '''removable printbed'''. So before printing, make sure that '''all 4 screwheads''' are forward to properly secure the printbed. |