Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: also edit for Blue iPrint-3D PETG
(→Status: remove Y-axis shift note, after fixing this.) |
(→Status: also edit for Blue iPrint-3D PETG) |
||
| Line 7: | Line 7: | ||
<onlyinclude> | <onlyinclude> | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
** PETG | ** PETG in printer -- with Blue iPrint-3D PETG loaded | ||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* Loaded with 1.75mm Filaments.ca Black PLA | * Loaded with 1.75mm Filaments.ca Black PLA | ||