Type A: Difference between revisions
Jump to navigation
Jump to search
→Status: update after work done & problems found
(→Machine Log: update for work done) |
(→Status: update after work done & problems found) |
||
| Line 8: | Line 8: | ||
* '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | * '''Operational''' ... use PETG head '''only''' for PETG, and the PLA head '''only''' for PLA. | ||
** PETG printhead in printer -- loaded with 1.75mm Blue iPrint-3D PETG. | ** PETG printhead in printer -- loaded with 1.75mm Blue iPrint-3D PETG. | ||
* The Buld Plate is no longer perfectly flat. (Small high area, centered on X-axis & bit behind Y-axis center.) | |||
* The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | * The Printhead Heatsink Fan is '''always on''' ... so don't leave this printer powered on for long periods of time without printing. | ||
* [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | * [[3D_Printers#Cura_15|Cura 15 Settings here]] (see Cura 3 Settings section instead.) | ||