111
edits
Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
→Machine Log
(→Status) |
|||
| Line 32: | Line 32: | ||
!Notes | !Notes | ||
!Entry By | !Entry By | ||
|- | |||
|April 28, 2017 | |||
|Tightened all the frame screws. Unwittingly tightened the tensioner screw on the rails (the middle screw of those plastic pieces on the frame) and the head would not move. Loosened them and head moves good now. | |||
The plastic connector for the printhead fan was coming in between the head and the orange rail holder, preventing homing. Secured that wire using a zip tie. | |||
|Rana | |||
|- | |- | ||